Top Plasma Table Projects: Highly Recommended Of 2022

Adam Alter By, Adam Alter
Updated
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
Image credit: Amazon.com

The information and peak level of Plasma table projects have been researched by our staff and experts. They try to cover as many reliable products as possible to suit your 2022 needs. About 10 Plasma table projects are reached through 6,850 reviews from people experiencing the item before. Of course, they come from famous brands such as Lotos, S7, Hynade, Tooliom, Reliancer, 911 motorsports, Goplus, Hypertherm, Primeweld, Powermax45 xp.

Our Top Picks

  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • 【3 Shelves for Easy Access and Storage】The welder cart featured with 3-level shelves that provides ample storage space to organize your welding tools and equipments,help you built a neat and ordered garage or workshop!Spacing between each shelf is convenient and easy to access whatever tools you need!The top shelf accommodates most welders and plasma cutters.The middle and bottom shelves allow storage of necessary welding accessories,such as welding helmet,welectric drill,welder wire,etc.
  • 【Cylinder Rack w/Safety Chain】The 3 tiers welder cart is equipped with a spacious rear shelf for storing shielding gas bottle up to 9.6in diameter,comes with an extended chain to keep tank securely in place,add more stability and safety!Cut out in rear to allow plasma cutter cable routing through the rear of the cart!Designed with 2 side heavy-duty hanging hooks for cable storage!Equipped with a tilted handle that is ergonomically designed for easy maneuverability around the workshop
  • 5 pc. kit includes 10 hole sizes. 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3". The outside radius acts as bonus sizes, add 2" for 380/430 sizes add 2 1/4" for 580 size.
  • Quick and accurate circle cutting. The stencils are offset to cut the indicated size from the center of the plasma arc, this allows a little clearance for easy assembly.
  • 【Durable Construction】It is constructed of premium steel, fully painted cart can withstand rust and wear, a strong welding cart for your long-term use. This sturdy and durable welder cart is ideal for MIG/ TIG/ ARC welders and plasma cutters.
  • 【100 Lbs Weight Capacity】This welder cart can hold weight up to 100 Lbs. Ideal for both home garages and workshops.
  • Auto-voltage automatically adapts to 110 V - 240 V input power. Plug adapters included.
  • Auto-voltage automaticvally adapts to 110 V - 240 V input power. Plug adapters included.
  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • Blow-back start technology, Pilot Arc
  • Hypertherm Powermax45 XP Hand System w/o CPC - 20' Leads 088112

Compare Specs Plasma table projects

Our Picks Our Score Brand Color Size (In.) Weight (lb) Delivery
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
Check Price
9.8
LOTOS Brown 6.0 x 12.0 x 15.0 19.40
50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine
50Amp Non-Touch Pilot Air Plasma Cutter 110V
Check Price
9.7
S7 Blue - -
Plasma Cutter, CUT50H 50A Dual Voltage 110/220V, AG60 Torch Plasma cutting machine, Inverter Metal Plasma Cutter Max Cutting Thickness 14mm (CUT50H 110/220V)
Plasma Cutter, CUT50H 50A Dual Voltage 110/220V, AG60 Torch Plasma cutting machine
Check Price
9.6
hynade - - -
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
Check Price
9.4
TOOLIOM - - -
Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart 180 Lbs Weight Capacity with Tank Storage & 2 Cable Hooks & Safety Chain Plasma Cutting Equipment
Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart 180 Lbs Weight Capacity with Tank Storage & 2 Cable Hooks & Safety Chain Plasma Cutting Equipment
Check Price
9.3
RELIANCER - - -
911 motorsports Plasma Stencil - Circle Cutter Guide - 5 pc. Kit - .380"
911 motorsports Plasma Stencil - Circle Cutter Guide - 5 pc. Kit - .380"
Check Price
9.1
911 motorsports - - - -
Goplus Welder Cart, MIG TIG ARC Welding Plasma Cutter Tank Storage w/2 Safety Chains, 100 Lb Capacity, Portable 4-Drawer Cabinet
Goplus Welder Cart, MIG TIG ARC Welding Plasma Cutter Tank Storage w/2 Safety Chains
Check Price
9.0
Goplus welder cart 12.0 x 15.0 x 37.0 49.00 -
Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead
Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead
Check Price
8.9
Hypertherm - 5.5 x 11.5 x 14.0 2.20 -
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
Check Price
8.7
PRIMEWELD - 11.0 x 19.0 x 20.0 - -
Hypertherm Powermax45 XP Hand System w/o CPC - 20' Leads
Hypertherm Powermax45 XP Hand System w/o CPC - 20' Leads
Check Price
8.6
Powermax45 XP - 6.8 x 14.1 x 17.4 36.00 -

Do You Find It Straightforward To Pick Up Plasma table projects? Does It Satisfy You?

The Plasma table projects is assessed based on many factors. Plasma table projects research varies depending on the type, feature, and quality of this product. It is not too complex to cover, yet we will give you some buying guide and solutions to these problems.

You guys, customers can count on the accuracy and innovation of our information and advice at all times. This target is currently being pursued with a large amount of determination. The article here comes to solve FAQs and then the criteria you may know about Plasma table projects.

  • Is it essential to spend time going through the criteria of the product before paying for it?
  • Is there any source for you to learn more about the product?
  • Why should you be interested in this product? Is investment worthy of it?
  • What product lines are best-sellers in many stores?
  • What will you get after making this purchase?

Our information delivered for you is reached with the support of AI tools and Big Data. This is the reason why you can believe in the accuracy and objectiveness level of our notification. 

Besides, taking a closer look at Plasma table projects characteristic below would be beneficial for you guys. Let’s look through and keep in mind:

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

FAQs

1. Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

2. How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

3. How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

4. How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

5. Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

6. Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

7. How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

8. What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

Our Plasma table projects of 2022 will be occasionally updated with new and available information. Please pay more attention to the data on our website or subscribe to our newsletter so that any updates or changes will come to your mind in time.

Keep in mind that any things related to Plasma table projects are in our hands. Thus, you can contact and ask for help whenever you need it. Thank you!


0 ratings
Adam Alter By, Adam Alter