Plasma Cutters For Sale: Top Picks 2022, Recommendations, And FAQs
By, Franklin FoerUpdated
Our experts in the fields of Plasma cutters for sale in May 2022 have accounted for a relatively large number of interested customers who have enough budget to invest in it. Below is a list of 12 products from famous brands like Lotos, Hynade, Hugeweld, Warfox, Hiweld, Flaring, Tooliom, Reboot, Herocut, Yeswelder for your reference.
Our Top Picks
- ★ Cutting Thickness: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V.Engine Power : Electric (AC)
- ★Focus on Customer Support:Backed by a 2-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical specialists and representatives !
- 👉 This is 50Amps plasma cutter, CUT50H 110/220V dual voltage plasma cutting machine, It is air inverter technology 50/60Hz, severance max cutting thickness is 14mm, quality cutting thickness is 10mm, this plasma cutter is high frequency need to touch metal get arc starting.
- 👉 Post Time Function, Machine with function post time 2-15seconds, Adjust the time for the air keep blowing out from the torch head, Cooling torch and consumables, Warranty: two years for this plasma cutting machine. Free service in American if machine getting any problem within two years (not include accessories, they are consumables)
- ★ PLASMA CUTTER--50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum;
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color CT520D Plasma Cutter are "LCS22" or "LCS33". Please search "Loots LCS22" or "Loots LCS33"; ★ NOT compatible with Loots LCON20, LCON40 or LCON90 Consumables Sets or any other third part consumables set
- Plasma Cutter, Touch Metal get arc starting, 45Amps cutting current in voltage 220V, 35Amps Cutting current in voltage 110V. Machine with current display, range from 15 to 45Amps. Post time can be adjust from 2 to 15 seconds. Machine easy cut stainless steel, Carbon steel, Alloy, etc.
- The air compressor we suggest it can supply the air 30L/min, Better 40L/min. Air gauge pre-fixed at front panel of machine, The user easy read air pressure through it. Machine also with post time function can adjust post air cooling the torch head.
- 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
- 🛡️50 Amp OUTPUT & PERFORMANCE★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current.
- [Input Votage AC-DC] Dual voltage input automatic dual voltage / dual frequency (110/120 v 220/240 v 50/60hz).Air Pressure 60-70PSI suggested.
- [Warranty Assurance] We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,3 year's warranty.Please add to cart and take it without hesitation
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- 🛒[Updated Model] AC 110V output 60% duty cycle air plasma cutter.High frequency inverter【50A breaker suggested】
- 🛒[Packing List] 1Xpower source plasma cutting machine,1X13ft pt31 cutting torch,1X6.56ft earth clamp cable,1Xhose 6.5ft,1Xair pressure valve
Compare Specs Plasma cutters for sale
| Our Picks | Our Score | Brand | Color | Size (In.) | Weight (lb) | Delivery | |
|---|---|---|---|---|---|---|---|
|
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
|
Check Price | LOTOS | Brown | 6.0 x 12.0 x 15.0 | 19.40 |
prime
|
|
Plasma Cutter, Dual Voltage 115/230V 50A plasma cutting machine
|
Check Price | hynade | - | - | - |
prime
|
|
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
|
Check Price | LOTOS | - | 13.0 x 26.0 x 10.0 | 22.50 |
prime
|
|
Plasma Cutter,50Amps Cut50 Dual Voltage,Plasma Torch Max Cutting Thickness 16mm
|
Check Price | HUGEWELD | Green | - | - |
prime
|
|
Plasma Cutter, CUT50H 50A Dual Voltage 110/220V, AG60 Torch Plasma cutting machine
|
Check Price | hynade | - | - | - |
prime
|
|
Lotos CT520D 50 AMP Air Plasma Cutter
|
Check Price | LOTOS | Brown | 8.0 x 11.0 x 17.0 | 33.10 |
prime
|
|
Plasma Cutter, 45Amps Plasma Cutting Machine,110/220V Dual Voltage Metal Cutter
|
Check Price | warfox | Orange | - | - |
prime
|
|
Plasma Cutter
|
Check Price | Hiweld | Blue | - | - |
prime
|
|
FLARING Plasma Cutter 50 AMP 110V/220V 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum
|
Check Price | FLARING | White | - | - |
prime
|
|
Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut
|
Check Price | LOTOS | Brown | 5.5 x 9.0 x 14.0 | - |
prime
|
|
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
|
Check Price | TOOLIOM | - | - | - |
prime
|
|
Reboot Plasma Cutter IGBT Inverter Portable 110V CUT40 Air Plasma Cutting Machine 2/5in Clean Cut High Frequency Inverter Duty Cycle for Stainless Mild Steel Copper Iron
|
Check Price | Reboot | Green | - | - |
prime
|
|
Herocut Plasma Cutter, 35Amp Plasma Cutting Machine
|
Check Price | HEROCUT | - | - | - |
prime
|
|
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut
|
Check Price | YESWELDER | - | - | - |
prime
|
What Is The Ideal Item Among Plasma cutters for sale That Meets Your High Expectation?
Until now, numerous customers trust the information and advice we offer them, which means our offers to you are accurate and up to date all the time. This objective is being pursued with tremendous zeal and attention.
It would be best if you guys continued to be the highest focus. The first step in making an informed shopping decision is to educate yourself with the below FAQs:
- Where could you find the help and support for product concerns?
- What is the value of this investment?
- In the current market, which one is the best ideal product?
- How can you evaluate the quality of this product?
- What are the advantages this product offer?
Thanks to surveys from well-known websites, forums, and user feedback, we've produced a list of Plasma cutters for sale of 2022 that you can buy on e-commerce websites. To assist you in making the most accurate automatic selection, we used AI and Big Data methods to search and assess our items below. Thus, you can trust their quality.
Because these characteristics were created and approved by our experts and support from technology, a critical study of them would be beneficial. It's necessary to keep in mind the following:
Safety
Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.
Severance Thickness
To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.
Ideal Cut
When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.
Duty Cycle
The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.
Voltage
The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.
Consumables
Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.
Built-in Air Compressor
You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.
Pilot Arc
Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.
Weight
When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.
FAQs
1. How Do I Choose A Plasma Cutter?
Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
2. What Is Possible To Cut By Plasma Cutting?
Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
3. How Much Air Pressure Is Needed For A Plasma Cutter?
It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
4. How Do You Set Up A Plasma Cutter?
Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
5. Is A Cheap Plasma Cutter Worth It?
You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.
6. How Much Faster Is A Plasma Cutter?
Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.
People are still working to increase the speed. Better speed means better products.
7. Can We Cut Wood Or Plastic With A Plasma Cutter?
It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
8. Why Does My Plasma Cutter Cut On An Angle?
Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
In general, we keep collecting and researching new information for Plasma cutters for sale. Please pay more attention to checking our website regularly or subscribe to our newsletter to read the latest updates.
Along with product-related issues, we can also support you more. So please give us your feedback and response whenever you need it. It will be a significant motivation for us to improve everything
By, Franklin Foer
