Plasma Cutter With Compressor In 2022: Our Top Picks

Bruce Schneier By, Bruce Schneier
Updated
ANDELI 50Amp Plasma Cutter Built-in Air Compressor Maximum Cut Thickness 63/64″(25mm) Low Frequency DC Inverter IGBT Air Plasma Cutting Machine CUT-50Y Pro X (220V)
Image credit: Amazon.com

Below you'll find the 2022 plasma cutter with compressor you're looking for. Our experts have paid close attention to the customer's requirements and budget. As a result of our survey of 2,737 user reviews, we've listed 12 relevant goods from well-known brands such as Andeli, Hobart, Amicopower, Reboot, Lotos, Primeweld, Tooliom, Warfox, Forney, S7.

Products Suggest

  • 【FULL PACKAGE KIT】 Low Frequency Start Plasma Cutter*1,PT-31 6M Torch *1,Gas pipe 3M*1,Hose Hoop*2,Electrode*10,Tip*10,Nozzle Shield*10,Shunt*10,Hose Barb *2,Oil-water Separator*1,Pneumatic Joint*2.
  • 【LOW FREQUENCY START】The arc starting of the low-frequency plasma cutting machine is easier, which greatly reduces the electromagnetic interference generated by the high-frequency and high-voltage discharge, and improves the reliability. It is widely used in automatic CNC cutting and places with strict requirements on electromagnetic interference.
  • Cuts faster than oxy fuel
  • More precise cut, thinner kerf, less slag to clean up
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • 🛒[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)【30A breaker suggested for220V,50A breaker suggested for 110V】
  • 🛒[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
  • ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • Max Cut Thickness: 1/2"
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables
  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality electronic power components, This machine adopt latest IGBT Advanced inverter soft switch technology, Nice cutting surface at 12mm thick, Machine come with high quality consumables

How Do You Know Which plasma cutter with compressor Here Satisfies Your Tight Criteria?

Buyers are frequently hesitant to purchase plasma cutter with compressor. Certain factors should be considered while making a significant purchase. Our understanding and expertise with plasma cutter with compressor will assist you in making the right decisions.

The top selections will address many of the most notable new products on the market, as well as a few frequently asked questions:

  • What is the name of the location where people can go to seek assistance?
  • Would you agree that spending your time and money on this item is a wise idea?
  • Which product lines are now the most popular?
  • What advantages does the product provide to its users?
  • What is the best way for customers to find the best solution?

plasma cutter with compressor have become one of the most essential and valuable information sources accessible on the internet nowadays, especially with the proliferation of commerce websites, market forums, user ratings, and reviews.

They have been put in place in line with the quality that has undergone technical accreditation. Take the following into consideration:

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

FAQs

What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

We constantly update the list of plasma cutter with compressor as new data becomes available. For the most up-to-date information, please visit our website regularly.

Please feel free to contact us if you have any queries or concerns with plasma cutter with compressor. If you ask, we'll do our hardest to help you in any way we can!


1 ratings