Plasma Cutter With Air Compressor In 2022: Our Top Picks

John Scalzi By, John Scalzi
Updated
ANDELI 50Amp Plasma Cutter Built-in Air Compressor Maximum Cut Thickness 63/64″(25mm) Low Frequency DC Inverter IGBT Air Plasma Cutting Machine CUT-50Y Pro X (220V)
Image credit: Amazon.com

Below you'll find the 2022 plasma cutter with air compressor you're looking for. Our experts have paid close attention to the customer's requirements and budget. As a result of our survey of 4,660 user reviews, we've listed 10 relevant goods from well-known brands such as Andeli, Lotos, Hobart, Reboot, Yeswelder, Jomwecl, Kop&wdhom, Amicopower.

Products Suggest

  • 【FULL PACKAGE KIT】 Low Frequency Start Plasma Cutter*1,PT-31 6M Torch *1,Gas pipe 3M*1,Hose Hoop*2,Electrode*10,Tip*10,Nozzle Shield*10,Shunt*10,Hose Barb *2,Oil-water Separator*1,Pneumatic Joint*2.
  • 【LOW FREQUENCY START】The arc starting of the low-frequency plasma cutting machine is easier, which greatly reduces the electromagnetic interference generated by the high-frequency and high-voltage discharge, and improves the reliability. It is widely used in automatic CNC cutting and places with strict requirements on electromagnetic interference.
  • ★ QUICK Setup--the per installed Air filter Regulator with NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • More precise cut, thinner kerf, less slag to clean up
  • Smaller heat-affected zone for less warping
  • 🛒[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2"(12mm). Max Severance Thickness: 3/4"(16mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.
  • 🛒[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • 🔥Our service: We offer 60 days refund and a 2-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. please feel free to contact us by phone or email, We are glad to serve you。
  • 🔥 50 Amp output★: Up to 50A output current can cut up to 31/64 inch (13.0 mm) boards. Equipped with digital display and alarm LED to read the output welding current.
  • PAPST Advanced German Cooling System
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Duty Cycle, Automatic 110/220V DC dual voltage plasma cutting duty cycle with 60% at 50A, 100% at 40A,1/2” ideal clean cut and 3/4"max severance thickness,suggest 50A breaker on 110V,30A on 220V.
  • Plasma cutter with premium cutting ability,touch arc powerful cutting effect for portability and non-hazardous comessed air cleancut stainless steel, alloy steel, mild steel, copper,cast iron and chrome.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.
  • CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.

How Do You Know Which plasma cutter with air compressor Here Satisfies Your Tight Criteria?

Buyers are frequently hesitant to purchase plasma cutter with air compressor. Certain factors should be considered while making a significant purchase. Our understanding and expertise with plasma cutter with air compressor will assist you in making the right decisions.

The top selections will address many of the most notable new products on the market, as well as a few frequently asked questions:

  • Would you agree that spending your time and money on this item is a wise idea?
  • What advantages does the product provide to its users?
  • What is the best way for customers to find the best solution?
  • What is the name of the location where people can go to seek assistance?
  • Which product lines are now the most popular?

plasma cutter with air compressor have become one of the most essential and valuable information sources accessible on the internet nowadays, especially with the proliferation of commerce websites, market forums, user ratings, and reviews.

They have been put in place in line with the quality that has undergone technical accreditation. Take the following into consideration:

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

FAQs

How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

We constantly update the list of plasma cutter with air compressor as new data becomes available. For the most up-to-date information, please visit our website regularly.

Please feel free to contact us if you have any queries or concerns with plasma cutter with air compressor. If you ask, we'll do our hardest to help you in any way we can!


1 ratings