Plasma Cutter Safe In 2022: Top Picks & Buying Guide

John Scalzi By, John Scalzi
Updated
Cuwiny CUT50D DC Inverter Plasma Cutter,50Amp 110V/220V Dual Voltage IGBT Air Inverter Plasma Cutting Machine,1/2 Inch Clean Cut,with Premium and Rugged Plasma Cutter Accessories Tools.
Image credit: Amazon.com

Our team of experts has done research and evaluation to cover a large number of customer reviews (nearly 7,537) with high demand and enough money to get the top 10 Plasma cutter safe of 2022. Moreover, these outstanding products come from well-known brands, such as Cuwiny, Display4top, Lotos, Goplus, S7, Yeswelder, Reboot, Flaring.

Our Top Picks

  • 【Durable Construction】It is constructed of premium steel, fully painted cart can withstand rust and wear, a strong welding cart for your long-term use. This sturdy and durable welder cart is ideal for MIG/ TIG/ ARC welders and plasma cutters.
  • 【100 Lbs Weight Capacity】This welder cart can hold weight up to 100 Lbs. Ideal for both home garages and workshops.
  • 🛡️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)
  • 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • Buy with confidence: we offer 30 days refund :us based customer care & support team: please feel free to contact us by phone or email, we always stand back on our products. please submit the registration form on our website
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • 🛒Cutting Material: Stainless steel, Alloy steel,Mild steel,Copper,Cast Iron and Chrome.
  • 🛒Packing List: 1X Power source RBC-5000D,1X 6.5ft cable +Earth clamp,1X Gas regulator with, 1X 13ft PT31 welding torch and 2pcs torch consumable,1X 7.86in 110/220V Conversion Line,1X 6.5ft Welding gas hose.Click on the Add To Cart button now!
  • 【Non-Touch FL-550】Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality and longer consumable life.(Breaker Recommendation:50A on 110V,30A on 220V)
  • 【Advanced IGBT Inverter】Save energy and noiseless, high cutting speed,cutting smoothly. The conversion line is easy to transfer from input 110V to 220V dual-frequency (110/120V 220/240V 50/60hz). Air pressure 60-70psi recommended.

Compare Specs Plasma cutter safe

Our Picks Our Score Brand Color Size (In.) Weight (lb) Delivery
Cuwiny CUT50D DC Inverter Plasma Cutter,50Amp 110V/220V Dual Voltage IGBT Air Inverter Plasma Cutting Machine,1/2 Inch Clean Cut,with Premium and Rugged Plasma Cutter Accessories Tools.
Cuwiny CUT50D DC Inverter Plasma Cutter,50Amp 110V/220V Dual Voltage IGBT Air Inverter Plasma Cutting Machine,1/2 Inch Clean Cut,with Premium and Rugged Plasma Cutter Accessories Tools.
Check Price
9.8
Cuwiny - 122.4 x 74.4 x 177.6 6.25
Display4top CUT-50 DC Inverter Plasma Cutter,110/220V Dual Voltage Compact Metal Cutting Machine
Display4top CUT-50 DC Inverter Plasma Cutter,110/220V Dual Voltage Compact Metal Cutting Machine
Check Price
9.6
display4top - - -
Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP Digital)
Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
Check Price
9.5
LOTOS - 7.1 x 12.0 x 16.0 -
Goplus Welder Cart, MIG TIG ARC Welding Plasma Cutter Tank Storage w/2 Safety Chains, 100 Lb Capacity, Portable 4-Drawer Cabinet
Goplus Welder Cart, MIG TIG ARC Welding Plasma Cutter Tank Storage w/2 Safety Chains
Check Price
9.4
Goplus welder cart 12.0 x 15.0 x 37.0 49.00 -
50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine
50Amp Non-Touch Pilot Air Plasma Cutter 110V
Check Price
9.2
S7 Blue - -
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
Check Price
9.1
LOTOS Brown 6.0 x 12.0 x 15.0 19.40
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut
Check Price
8.9
YESWELDER - - -
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
Check Price
8.8
LOTOS - 13.0 x 26.0 x 10.0 22.50
Plasma Cutter 50 Amp 1/2" Clean Cut CUT50D 110V/220V IGBT Air Plasma Cutting Machine Compact Metal Cutter High Frequency Inverter Cutting for Alloy Mild Steel Cast Iron and Chrome
Plasma Cutter 50 Amp 1/2" Clean Cut CUT50D 110V/220V IGBT Air Plasma Cutting Machine Compact Metal Cutter High Frequency Inverter Cutting for Alloy Mild Steel Cast Iron and Chrome
Check Price
8.6
Reboot GREEN 9.8 x 11.0 x 14.5 19.80
FLARING Plasma Cutter Non Touch 50 AMP 110/220V FL550D 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine
FLARING Plasma Cutter Non Touch 50 AMP 110/220V FL550D 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine
Check Price
8.5
FLARING White - -

Which Way Should You Follow To Achieve Plasma cutter safe Of 2022?

Today, our article intends to introduce and describe to you the Plasma cutter safe, which can be found easily on e-commerce websites these days. Nevertheless, it might take lots of time to get the best item for purchase. As a result, we're always here to help you with your problem.

Before making a purchase, Plasma cutter safe should be thoroughly researched. The following are some common questions you may raise. After being evaluated and confirmed to be effective, the most beneficial ones were picked.

  • How should you get to the point of buying a guide?
  • Why are you advised to invest in this product?
  • What is the most popular one among these products listed here?
  • Are there any benefits from this product?
  • Where is a reliable place for you to ask for support?

This article includes carefully and accurately checked and selected information about products through AI and Big Data. The goal is to create an accurate and objective set of information for you guys to count on.

Items on this list have undergone extensive testing and approval by experts. Your task is to consider the following factors:

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

FAQs

1. How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

2. Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

3. How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

4. How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

5. Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

6. Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

7. How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

8. What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

Please make sure that you read this article carefully to pick your ideal products. Furthermore, please visit our website frequently or subscribe our newsletter to catch up with any new updates.

Don't hesitate to get in touch with us for more information. Also, if you have any questions or difficulties about the product, don’t hesitate to give us your feedback. Thanks for reading!


1 ratings
John Scalzi By, John Scalzi