Plasma Cutter Projects - Buying Guide 2022
By, Adam AlterUpdated
Our experts have tried to research, evaluate, and select the most appropriate models for you guys! The Plasma cutter projects of 2022 you're thinking about will have 12 models available on the market, as well as 4,701 consumer feedback. You should also consult the list of well-known manufacturers, such as Primeweld, Lotos, S7, Reboot, Flaring, Yeswelder, Dnyker, Herocut, Forney, Display4top.
Our Top Picks
TOP Choice #1
![PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty]()
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- 60% duty cycle at 60amps, 110/220 with adapter
TOP Choice #2
![Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut]()
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- ★ QUICK Setup--the per installed Air filter Regulator with NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
- ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". PACKAGE INCLUDES: Power supply, Plasma cutting torch, Tig torch, MMA/Stick clamp, Ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, Consumables, Instruction Manual, etc. To buy the compatible Argon Regulator, please search Lotos AR03 or Lotos AR04
- ★ NON-TOUCH PLASMA CUTTER: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
- PAPST Advanced German Cooling System
- Non touch pilot arc plasma cutter: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
- 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
- 🛒Packing List: 1X Power source RBC-5000D,1X 6.5ft cable +Earth clamp,1X Gas regulator with, 1X 13ft PT31 welding torch and 2pcs torch consumable,1X 7.86in 110/220V Conversion Line,1X 6.5ft Welding gas hose.Click on the Add To Cart button now!
- 🛒Duty Cycle: Automatic 110/220V DC dual voltage plasma cutting duty cycle with 60% at 50A, 100% at 40A
- [Cutting Ability] This 50A plasma cutter machine automatic 110/220v ac-dc dual voltage,10-50A dc output, 1/2''(12mm) ideal clean cut and 3/5''(15mm) maximum severance cut on 220v;10-40A dc output, 1/3"(8mm) ideal clean cut and 2/5"(10mm) maximum severance cut on 110v.
- [Input Votage AC-DC] Dual voltage input automatic dual voltage / dual frequency (110/120 v 220/240 v 50/60hz).Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W.
- Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- Powerful Cutting Ability：10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.
- MULTI APPLICATIONS: MELLCOM plasma cutter is specially designed for cutting stainless steel, alloy steel, low carbon steel, copper and aluminum and other metal materials. It can effectively cut rough, painted and rusty surfaces, and generates the least slag. It provides better cutting quality while ensuring a longer life of wearing parts.
What to Look Through Prior to Buying the Plasma cutter projects?
Visitors may be aware that purchasing something is not actually an easy action. Your everyday life will be affected if you choose the most fantastic product. What variables, though, will make this acquisition successful? Whether you're seeking for Plasma cutter projects to meet your needs, you'll be wasting your own time.
Nevertheless, it would be preferable if you weren't so worried. We've enlisted the help of a team of professionals to investigate Plasma cutter projects, and we've provided accurate data.
As mentioned above, our article's description is accurate, and perhaps the most crucial reason for that is the conduction by highly qualified specialists with many years of market expertise. Furthermore, designers use AI and Big Data to ensure that the information you discover here is accurate and reliable.
There seem to be several important considerations to make. But only a few of them are really concentrated. Here are some crucial reviews while purchasing Plasma cutter projects:
Safety
Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.
Built-in Air Compressor
You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.
Ideal Cut
When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.
Weight
When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.
Pilot Arc
Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.
Voltage
The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.
Duty Cycle
The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.
Severance Thickness
To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.
Consumables
Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.
FAQs
1. Why Does My Plasma Cutter Cut On An Angle?
Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
2. Can We Cut Wood Or Plastic With A Plasma Cutter?
It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
3. What Is Possible To Cut By Plasma Cutting?
Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
4. How Much Air Pressure Is Needed For A Plasma Cutter?
It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
5. Is A Cheap Plasma Cutter Worth It?
You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.
6. How Do I Choose A Plasma Cutter?
Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
7. How Much Faster Is A Plasma Cutter?
Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.
People are still working to increase the speed. Better speed means better products.
8. How Do You Set Up A Plasma Cutter?
Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
Conclusion
The figures we've presented here aren't all of them. Alternatively, we continuously update it as new information becomes available. It's advisable to keep in mind the points we discussed related to buying guide.
We always appreciate your feedback and handle it with the utmost importance. As a result, the most up-to-date data will come to your mind as soon as possible. You are supposed to contact us and give us your reviews as well as problems so that we will try to support you. Hope you have a pleasant shopping experience!
By, Adam Alter
