Plasma Cutter Lead In 2022: Our Top Picks
By, Bruce SchneierUpdated
Below you'll find the 2022 Plasma cutter lead you're looking for. Our experts have paid close attention to the customer's requirements and budget. As a result of our survey of 5,554 user reviews, we've listed 12 relevant goods from well-known brands such as Lotos, Yeswelder, Herocut, Amicopower, S7, Super deal, Hypertherm, Tooliom, Reboot, Primeweld, Warfox.
Our Top Picks
- 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
- CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- 🛡️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
- 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
- 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators.
- 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection. Comes with wire and mask, which can prevent you from hurting while using.
- Duramax LT torch design provides a sure, comfortable grip made from heat and impact resistant material.
- Comes with hard carry case, ehe shields, gloves, shoulder strap, standard consumables and FineCut consumables.
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
- 🛒[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty
- 🛒[Voltage Transfer] Conversion line easy transfer from 110V to 220V Home Use, Air Pressure 60-70PSI.
- CUT-60HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
- CUT-60HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.0 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
- MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
- DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors.
- The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room
- Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine
Compare Specs Plasma cutter lead
| Our Picks | Our Score | Brand | Color | Size (In.) | Weight (lb) | Delivery | |
|---|---|---|---|---|---|---|---|
|
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
|
Check Price | LOTOS | Brown | 6.0 x 12.0 x 15.0 | 19.40 |
prime
|
|
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut
|
Check Price | YESWELDER | - | - | - |
prime
|
|
Herocut Plasma Cutter, 45Amp Plasma Cutting Machine
|
Check Price | HEROCUT | - | - | - |
prime
|
|
Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage
|
Check Price | AmicoPower | - | 7.9 x 13.9 x 17.9 | 25.00 | - | |
50Amp Non-Touch Pilot Air Plasma Cutter 110V
|
Check Price | S7 | Blue | - | - |
prime
|
|
SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean Cut (CUT 50)
|
Check Price | SUPER DEAL | Orange | 11.8 x 5.9 x 15.1 | 24.40 | - | |
Hypertherm 088079 Powermax30 XP Building America Edition Hand Plasma System with Case and 15-Feet Lead
|
Check Price | Hypertherm | - | 5.5 x 11.5 x 14.0 | 2.20 | - | |
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
|
Check Price | TOOLIOM | - | - | - |
prime
|
|
Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2" Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5'' Max Cutting for Copper Alloy Mild Steel Aluminum
|
Check Price | Reboot | Green | 9.8 x 11.0 x 14.5 | 19.80 |
prime
|
|
Amico CUT-60HF, 60 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage
|
Check Price | AmicoPower | Grey | 7.6 x 12.9 x 19.0 | 25.00 | - | |
PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine
|
Check Price | PRIMEWELD | - | - | - | - | |
Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine
|
Check Price | warfox | - | - | 8.20 |
prime
|
|
PrimeWeld Pilot Arc 50A Plasma Cutter, 200A TIG/Stick Welder Combo
|
Check Price | PRIMEWELD | - | - | - | - | |
Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
|
Check Price | LOTOS | - | 7.1 x 12.0 x 16.0 | - |
prime
|
How Do You Know Which Plasma cutter lead Here Satisfies Your Tight Criteria?
Buyers are frequently hesitant to purchase Plasma cutter lead. Certain factors should be considered while making a significant purchase. Our understanding and expertise with Plasma cutter lead will assist you in making the right decisions.
The top selections will address many of the most notable new products on the market, as well as a few frequently asked questions:
- What is the best way for customers to find the best solution?
- What advantages does the product provide to its users?
- Would you agree that spending your time and money on this item is a wise idea?
- Which product lines are now the most popular?
- What is the name of the location where people can go to seek assistance?
Plasma cutter lead have become one of the most essential and valuable information sources accessible on the internet nowadays, especially with the proliferation of commerce websites, market forums, user ratings, and reviews.
They have been put in place in line with the quality that has undergone technical accreditation. Take the following into consideration:
Ideal Cut
When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.
Severance Thickness
To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.
Consumables
Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.
Built-in Air Compressor
You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.
Voltage
The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.
Duty Cycle
The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.
Safety
Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.
Pilot Arc
Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.
Weight
When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.
FAQs
1. What Is Possible To Cut By Plasma Cutting?
Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
2. How Much Air Pressure Is Needed For A Plasma Cutter?
It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
3. Why Does My Plasma Cutter Cut On An Angle?
Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
4. How Do You Set Up A Plasma Cutter?
Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
5. Can We Cut Wood Or Plastic With A Plasma Cutter?
It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
6. How Do I Choose A Plasma Cutter?
Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
7. Is A Cheap Plasma Cutter Worth It?
You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.
8. How Much Faster Is A Plasma Cutter?
Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.
People are still working to increase the speed. Better speed means better products.
We constantly update the list of Plasma cutter lead as new data becomes available. For the most up-to-date information, please visit our website regularly.
Please feel free to contact us if you have any queries or concerns with Plasma cutter lead. If you ask, we'll do our hardest to help you in any way we can!
By, Bruce Schneier
