Plasma Cutter Design In 2022: Top Picks And FAQs

John Scalzi By, John Scalzi
Updated
Thermal Dynamics 1-4000-1 CUTMASTER 40 Plasma Cutter, SL60 1Torch, Ergonomic Design
Image credit: Amazon.com

Our specialists in the disciplines of this 10 Plasma cutter design have accounted for a significant number of interested consumers (nearly 3,261 customer reviews) with sufficient funds to invest in it. We've put up a list of items from well-known manufacturers in 2022 such as Thermal dynamics, Display4top, Lotos, S7, Yeswelder, Hynade, Reboot, Primeweld, Amicopower for your convenience.

Our Top Picks

  • 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40A 230V
  • ✌ hynade is high level brand at welding field. We focus on welding business more than 20 years. Also we have a service team in American.
  • 🛒Cutting Material: Stainless steel, Alloy steel,Mild steel,Copper,Cast Iron and Chrome.
  • 🛒Duty Cycle: Automatic 110/220V DC dual voltage plasma cutting duty cycle with 60% at 50A, 100% at 40A
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.

Compare Specs Plasma cutter design

Our Picks Our Score Brand Color Size (In.) Weight (lb) Delivery
Thermal Dynamics 1-4000-1 CUTMASTER 40 Plasma Cutter, SL60 1Torch, Ergonomic Design, 3 Lift Points, 1/2" Pierce, 1/2" Cut, 1" Sever, 110-240V Input, IP23 Designed
Thermal Dynamics 1-4000-1 CUTMASTER 40 Plasma Cutter, SL60 1Torch, Ergonomic Design
Check Price
9.8
Thermal Dynamics - 12.0 x 21.5 x 32.0 -
Display4top CUT-50 DC Inverter Plasma Cutter,110/220V Dual Voltage Compact Metal Cutting Machine
Display4top CUT-50 DC Inverter Plasma Cutter,110/220V Dual Voltage Compact Metal Cutting Machine
Check Price
9.6
display4top - - -
Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP Digital)
Lotos Supreme LTP5500D Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
Check Price
9.4
LOTOS - 7.1 x 12.0 x 16.0 -
50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine
50Amp Non-Touch Pilot Air Plasma Cutter 110V
Check Price
9.2
S7 Blue - -
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
Check Price
9.0
LOTOS - 13.0 x 26.0 x 10.0 22.50
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut
Check Price
8.9
YESWELDER - - -
hynade Plasma Cutter, Dual Voltage 115/230V plasma cutting machine, Inverter Metal Plasma Cutter Max Cutting Thickness 12mm (HYC45D 115/230V)
hynade Plasma Cutter, Dual Voltage 115/230V plasma cutting machine
Check Price
8.8
hynade - - -
Plasma Cutter 50 Amp 1/2" Clean Cut CUT50D 110V/220V IGBT Air Plasma Cutting Machine Compact Metal Cutter High Frequency Inverter Cutting for Alloy Mild Steel Cast Iron and Chrome
Plasma Cutter 50 Amp 1/2" Clean Cut CUT50D 110V/220V IGBT Air Plasma Cutting Machine Compact Metal Cutter High Frequency Inverter Cutting for Alloy Mild Steel Cast Iron and Chrome
Check Price
8.6
Reboot GREEN 9.8 x 11.0 x 14.5 19.80
PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2" Clean Cut, CUT50D
PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine
Check Price
8.5
PRIMEWELD - - - -
Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage, 3/5 in. Clean Cut Cutting Machine
Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage
Check Price
8.4
AmicoPower - 7.9 x 13.9 x 17.9 25.00 -

What Do You Think About Your Ideal List Of Plasma cutter design?

It may take a long longer to make the best shopping decision. As a result, we are accessible to assist you with your Plasma cutter design issue at any time of day or night!

Buyers are often given the most recent proposals. All we can do now is try our hardest to keep it going. In today's business world, the buyer still has the upper hand. Before forming an opinion, consumers should understand more about the FAQs:

  • So, what's all the fuss about the purchase?
  • If any of the items have benefits, what are they?
  • What are the advantages of internet shopping for consumers?
  • Should I put money into it if that's the case?
  • What is the most well-known item on the market now, according to customers?

As a preliminary step, some gathered data was provided. To give you an accurate viewpoint on the issue, we combine AI and Big Data data analytics. Customers will obtain objective and dependable statistics upon request.

Now here are some highlighted features of Plasma cutter design you should be aware of:

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

FAQs

1. Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

2. What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

3. How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

4. How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

5. How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

6. Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

7. Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

8. How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

We will keep the list of Plasma cutter design up-to-date once there are new technology and information available. Please check our website frequently to see the most up-to-date information by our editor.

Do you have any questions or comments regarding Plasma cutter design that you'd like to share with us? We will try to attain even greater comedy as a result of your efforts.


1 ratings
John Scalzi By, John Scalzi