Plasma Cutter Compressor - Complete Buying Guide 2022

John Scalzi By, John Scalzi
Updated
ANDELI 50Amp Plasma Cutter Built-in Air Compressor Maximum Cut Thickness 63/64″(25mm) Low Frequency DC Inverter IGBT Air Plasma Cutting Machine CUT-50Y Pro X (220V)
Image credit: Amazon.com

Our specialists have researched and chosen the most appropriate plasma cutter compressor of 2022 (Top 12 models in the list) for your needs and budget. They are also excellent products from a variety of manufacturers, including Andeli, Hobart, Amicopower, Lotos, Primeweld, Forney, S7, Tooliom, Warfox, Jomwecl, Hypertherm.

Products Suggest

  • 【SAFETY】CE certification, Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free guidance. We will provide returns and exchanges within 30 days after receiving the goods, and provide a two-year warranty and free replacement parts.
  • 【🏆BUILT-IN AIR COMPRESSOR】 A Real Breakthrough Design Across Eras!Built-in air compressor! This plasma cutter can cut without an air compressor! All you need is a plasma cutter, no need to carry a heavy air compressor while you work, making your job super easy!
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up
  • 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
  • 🔔★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.
  • 🔔★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting thickness in [email protected] 50A; Under 120V, it is 35Amps. Quality cutting thickness is 12mm, Severance cutting thickness 12mm in [email protected] 35Amps
  • 🔥Cutting Performance: 10-50 A DC output, 1/2” clean cut and 3/4” maximum cut under 220V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110V. Welding Performance: Compatible with φ Max.3.2mm acid & alkaline electrode.
  • 🔥Non-touch Pilot ARC Plasma Cutter: 50-Amp inverter Pilot Arc Plasma Cutters,efficiently cuts though rough, painted and rusty surfaces. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer life.

What Are The Most Critical Factors Of plasma cutter compressor That You Should Consider?

To make a significant purchase, you are supposed to know the plasma cutter compressor. There are a number of other difficulties that need to be investigated and evaluated. Every product has its challenges. Thus, you might count on us to provide you with detailed advice and guidance.

Come to this place. You are constantly given the latest information and recommendations. Your task now is to pay attention to our guides and following common questions of customer concerns:

  • Why should you invest in this product? Is it valuable for your life?
  • Do websites, forums reliable for you to ask for help?
  • What are the advantages this product offer?
  • What may I get from online information about this product?
  • How essential is customer follow buying guide from experts?

The data in this article has been supplied on an initial basis. Our approach merges AI and Big Data analysis to provide you with the most comprehensive view of the situation. Upon request, customers will obtain impartial and reliable information.

Based on what people and technical innovation have co-operated to analyze and build the following qualities, it’s helpful to look into lots of them:

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

FAQs

How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

In short, nowadays, plasma cutter compressor news and information can be easily found in many online sources of info. With the go up of technology, especially the Internet, you can keep updated with the latest news without worrying about missing anything by visiting our website frequently or subscribing to our newsletter.

We can assist you with plasma cutter compressor issues and a range of other concerns. Don't hesitate to get in touch with us if you require support for problems.


0 ratings