Plasma Cutter Art In 2022: Best For Selection
By, Bruce SchneierUpdated
For your convenience, this post will provide 12 Plasma cutter art, which is the most popular in May 2022 on internet. Our experts' product research has been done for your reading. Additionally, the products listed come from prominent brands such as Hynade, S7, Zs- mictek, Display4top, Warfox, Amicopower, Yeswelder, Herocut, Primeweld, Tooliom, Lotos.
Our Top Picks
- ★ Safe design:Built-in over-heat protection, over-voltage protection, under voltage protection.Comes with mask, which can prevent you from hurting while using.Compact plasma cutting machine with LCD digital display and equipped with a portable handle，It is very convenient to operate and carry.
- ★Dual Voltage:Automatic recognize the input voltage.he ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ.LCD Display,save energy and no noise, High cutting speed, Cutting smoothly.
- Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life
- Max cutting thickness 14mm ,10mm quality cutting thickness in [email protected] 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm
- CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
- 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
- Added Safety：Certificated by ETL，Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control
- Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal.
- Warranty Service:The plasma cutters offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty,you will get a local supports for you need.Buy with confidence.Work with standard parts, you can easy to find the consumables from our shop.
- Plasma Cutter, Touch Metal get arc starting, 45Amps cutting current in voltage 220V, 35Amps Cutting current in voltage 110V. Machine with current display, range from 15 to 45Amps. Post time can be adjust from 2 to 15 seconds. Machine easy cut stainless steel, Carbon steel, Alloy, etc.
- This air plasma cutter is dual voltage 110/220V, It is auto indicate the input voltage, no need to switch the voltage by handle on side of machine, But still need to plug machine by hand to different power source.
- 👍 This plasma cutter with current display and air gauge fixed on panel. Easy to read air pressure and current, these functions are great to help users to cut any metal
- 👍 Plasma Cutter, 110V 40A cutting machine with IGBT inverter technology. It is long life and efficient higher than most machine
- ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
- ✌Plasma cutter Pilot Arc 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency non-touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
- TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself.
- DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors.
Compare Specs Plasma cutter art
| Our Picks | Our Score | Brand | Color | Size (In.) | Weight (lb) | Delivery | |
|---|---|---|---|---|---|---|---|
|
Plasma Cutter, CUT50H 50A Dual Voltage 110/220V, AG60 Torch Plasma cutting machine
|
Check Price | hynade | - | - | - |
prime
|
|
50Amp Non-Touch Pilot Air Plasma Cutter 110V
|
Check Price | S7 | Blue | - | - |
prime
|
|
Plasma Cutters 45Amp 110/220V Plasma Cutting Machine,1/2'' Clean Cut High Frequency IGBT Portable Plasma Cutter for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum
|
Check Price | ZS- MICTEK | orange+black | - | 9.60 |
prime
|
|
Display4top CUT-50 DC Inverter Plasma Cutter,110/220V Dual Voltage Compact Metal Cutting Machine
|
Check Price | display4top | - | - | - |
prime
|
|
Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine
|
Check Price | warfox | - | - | 8.20 |
prime
|
|
Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage
|
Check Price | AmicoPower | - | 7.9 x 13.9 x 17.9 | 25.00 | - | |
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut
|
Check Price | YESWELDER | - | - | - |
prime
|
|
Plasma Cutter 50Amp Non-Touch Pilot Arc 110V/220V ±15% Dual Voltage 1/2'' Clean Cut,IGBT Inverter High Frequency Portable Plasma Cutting Machine
|
Check Price | ZS- MICTEK | - | - | - |
prime
|
|
Plasma Cutter, 45Amps Plasma Cutting Machine,110/220V Dual Voltage Metal Cutter
|
Check Price | warfox | Orange | - | - |
prime
|
|
Herocut Plasma Cutter, 45Amp Plasma Cutting Machine
|
Check Price | HEROCUT | - | - | - |
prime
|
|
hynade Plasma Cutter Pilot Arc, Dual Voltage 115/230V 50A Plasma Cutting Machine
|
Check Price | hynade | - | - | - |
prime
|
|
PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine
|
Check Price | PRIMEWELD | - | - | - | - | |
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
|
Check Price | TOOLIOM | - | - | - |
prime
|
|
Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut
|
Check Price | LOTOS | Brown | 5.5 x 9.0 x 14.0 | - |
prime
|
|
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
|
Check Price | LOTOS | - | 13.0 x 26.0 x 10.0 | 22.50 |
prime
|
|
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
|
Check Price | LOTOS | Brown | 6.0 x 12.0 x 15.0 | 19.40 |
prime
|
What Tips Are Recommended To Recognize Which Of Plasma cutter art Will Satisfy You Most?
Some people are apprehensive about purchasing Plasma cutter art. Numerous factors must be addressed while making a significant purchase. Our market expertise will help you make the best decision as soon as possible.
Article here will showcase some of the most notable things currently on the market and address frequently asked questions about them.
- Is this purchase a wise use of your time and money?
- Where is the supporting place for product-related issues?
- What are the product's attractions to the user?
- What is the most effective way for clients to look for the ideal solution?
- What is more prominent than other product lines in the current market?
Until now, Plasma cutter art is already one of the most indispensable items whose information sources are available on the internet today. The increase in reaching this product is as the growth of sales websites, online consulting forums, user evaluations, and comments.
The thing has been added to the list of products that have been subjected to technical testing and evaluation. Keep the following in mind:
Safety
Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.
Weight
When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.
Severance Thickness
To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.
Pilot Arc
Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.
Voltage
The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.
Consumables
Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.
Duty Cycle
The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.
Built-in Air Compressor
You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.
Ideal Cut
When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.
FAQs
1. How Do You Set Up A Plasma Cutter?
Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
2. Why Does My Plasma Cutter Cut On An Angle?
Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
3. How Much Faster Is A Plasma Cutter?
Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.
People are still working to increase the speed. Better speed means better products.
4. How Much Air Pressure Is Needed For A Plasma Cutter?
It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
5. What Is Possible To Cut By Plasma Cutting?
Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
6. Is A Cheap Plasma Cutter Worth It?
You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.
7. How Do I Choose A Plasma Cutter?
Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
8. Can We Cut Wood Or Plastic With A Plasma Cutter?
It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
In summary, we will update Plasma cutter art list as soon as new information is available. For the latest news, please visit our websites regularly or subscribe to our newsletter.
Please not feel hesitant to contact us if you have any queries or difficulties with Plasma cutter art. If you ask, we'll do everything we can to help!
By, Bruce Schneier
