Top Picks Plasma Cutter 120v: Updated In June 2022

Bruce Schneier By, Bruce Schneier
Updated
Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut
Image credit: Amazon.com

According to 3,917 reviews of customers on popular websites, our experts found that most of them are satisfied with top 10 Plasma cutter 120v, which is then searched trend below in June 2022. If you are a fan of some big-name manufacturers like Lotos, Hobart, Forney, Reboot, Dnyker, S7, Yeswelder, Zs- mictek, then you’re supposed to reach the right place.

Our Top Picks

  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • Built in Air Compressor
  • Smaller heat-affected zone for less warping
  • POWER- Output power on this Plasma Cutter is 120V: 15A -16A and 230V: 15A- 40A
  • Packaging of this item may vary as we transition to our new look.
  • 🛒This RBC-4000 plasma cutting machine works with 110v 40a output. 60% at 40a,100% at 28a.Duty cycle high frequency air plasma cutter.air pressure 60-70psi
  • 🛒Plasma Cutter package kit: 13ft pt31 cutting torch /earth clamp each 6.56 ft cable /hose 6.5ft /air pressure valve
  • 🛒Cutting Material: Stainless steel, Alloy steel,Mild steel,Copper,Cast Iron and Chrome.
  • 🛒Cutting Thickness: On 220V carbon steel max rated clean cut thickness: 1/2"(12mm),max severance thickness: 3/5"(15mm) .Under 110V clean cut chickness : 3/8 "(9mm) output current 30A.
  • QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 15 lbs. Easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • 🛡️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
  • 🛡️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)
  • DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
  • EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
  • Dual Voltage:It allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter. Suitable home DIY and industrial projects.
  • High-Frequency Cut: The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/8"@110V,5/16"@220V
  • ★Dual Voltage:This plasma cutter can automatically adapt to switch input power, Plug and play in different environments, no external conversion plug required,air pressure 60PSI recommend,breaker Recommendation:50A on 110V,30A on 220V.
  • ★Cutting Ability:Plazma cutter Automatic 110/220v ac-dc dual voltage,10-50A dc output, 1/2''(12mm) ideal clean cut and 3/5''(15mm) maximum severance cut on 220v;10-40A dc output, 1/3"(8mm) ideal clean cut and 2/5"(10mm) maximum severance cut on 110v.

What Suggestions Are Provided To You To Choose The Plasma cutter 120v Suitable For Your Needs?

To buy any product seems easy, but to choose the best one is not straightforward. The time you take to research its outcome is significant. The same matter also comes to Plasma cutter 120v of 2022 that we include in this article. But you can relax instead of spending too much time learning the products. It’s our duty!

The Plasma cutter 120v in this list has been tried and tested to find effective for users. To cover the main content of our buying guide, you are expected to see the FAQs here first:

  • Is it any use to shop for this product?
  • How many advantages are there if you invest in this product?
  • What is the best choice of this product in the market?
  • How to choose the best one step-by-step?
  • Where can you be provided with support from experts for any product-related issues?

In 2022, our post introduces the most used items among Plasma cutter 120v and their buying guide. You can easily find these models at many different prices and notifications on some sources like websites and forums. We have researched customers' needs and finances to invest in Plasma cutter 120v through AI tools and Big Data. So the materials you get are exact and reliable.

Here are the main features of Plasma cutter 120v that all of you guys should keep in mind when deciding to make a purchase:

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

FAQs

1. What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

2. Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

3. How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

4. Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

5. How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

6. Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

7. How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

8. How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

Conclusion

Thanks to our experienced editors, the information on the website is always up-to-date and, of course, accurate. But whether you get, it updated or not depends on how often you visit our website. Please make sure you keep a close look for us not to miss any change.

Would you mind letting us know if there are any issues or difficulties with Plasma cutter 120v? Your feedback, of course, inspires us with the motivation to improve the website!


0 ratings
Bruce Schneier By, Bruce Schneier