Top Cnc Plasma Cutter Factory Of 2022: Best Reviews & Guide
By, James GleickUpdated
Our specialists have researched and selected 12 Cnc plasma cutter factory on the market in 2022 that will satisfy both your demands and your budget. All of them come from the study of nearly 2,259 client feedbacks. Furthermore, there are exceptional items from reputable producers across the world, often Tooliom, Lotos, S7, Herocut, Hynade, Primeweld, Reboot, Everlast welders canada, Warfox.
Our Top Picks
- ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- ✤ Machine come with 110V power plug, We provide three years warranty for this unit.
- ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.
- ✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness [email protected] 40A 230V 45A up Power breaker is suggested.
- ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40A 230V
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
- Blow-back start technology, Pilot Arc
- VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.
- PORTABLE, RELIABLE UNIT: The multipurpose welder and plasma cutter weighs only 32lbs, making it a great portable option. It features a duty cycle of 60% at maximum amps on all processes. It also easily switches from DC TIG welder to DC stick welder.
- 🛒Packing List: 1X Power source RBC-5000D,1X 6.5ft cable +Earth clamp,1X Gas regulator with, 1X 13ft PT31 welding torch and 2pcs torch consumable,1X 7.86in 110/220V Conversion Line,1X 6.5ft Welding gas hose.Click on the Add To Cart button now!
- 🛒Cutting Thickness: On 220V carbon steel max rated clean cut thickness: 1/2"(12mm),max severance thickness: 3/5"(15mm) .Under 110V clean cut chickness : 3/8 "(9mm) output current 30A.
10
![2021 PowerPlasma 52i 50 Amp CNC compatible plasma cutter]()
- Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
- CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION
- 🛒[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty
- 🛒[Full Package Kit] 1 X 13ft AG60 Plasma Cutter Torch 1X Electrode holder and earth clamp each 6.56 ft cable 1 X Hose 6.5ft 1X Air Pressure Valve [ No Compressor Included ]
- The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room
- Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine
Compare Specs Cnc plasma cutter factory
| Our Picks | Our Score | Brand | Color | Size (In.) | Weight (lb) | Delivery | |
|---|---|---|---|---|---|---|---|
|
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
|
Check Price | TOOLIOM | - | - | - |
prime
|
|
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V
|
Check Price | LOTOS | Brown | 6.0 x 12.0 x 15.0 | 19.40 |
prime
|
|
50Amp Non-Touch Pilot Air Plasma Cutter 110V
|
Check Price | S7 | Blue | - | - |
prime
|
|
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
|
Check Price | LOTOS | - | 13.0 x 26.0 x 10.0 | 22.50 |
prime
|
|
Herocut Plasma Cutter, 35Amp Plasma Cutting Machine
|
Check Price | HEROCUT | - | - | - |
prime
|
|
hynade Plasma Cutter, Dual Voltage 115/230V plasma cutting machine
|
Check Price | hynade | - | - | - |
prime
|
|
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
|
Check Price | PRIMEWELD | - | 11.0 x 19.0 x 20.0 | - | - | |
PrimeWeld 3-in-1 50 Amp Plasma Cutter
|
Check Price | PRIMEWELD | - | - | - | - | |
Plasma Cutter 50 Amp 1/2" Clean Cut CUT50D 110V/220V IGBT Air Plasma Cutting Machine Compact Metal Cutter High Frequency Inverter Cutting for Alloy Mild Steel Cast Iron and Chrome
|
Check Price | Reboot | GREEN | 9.8 x 11.0 x 14.5 | 19.80 |
prime
|
|
|
2021 PowerPlasma 52i 50 Amp CNC compatible plasma cutter
|
Check Price | Everlast Welders Canada | - | - | - | - | |
Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2" Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5'' Max Cutting for Copper Alloy Mild Steel Aluminum
|
Check Price | Reboot | Green | 9.8 x 11.0 x 14.5 | 19.80 |
prime
|
|
Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine
|
Check Price | warfox | - | - | 8.20 |
prime
|
What Does Our Expert Advise You To Consider Cnc plasma cutter factory?
Cnc plasma cutter factory is chosen based on a number of parameters. Depending on the product category, the learning process differs. And so, we're here to consult, guide, and address your product-related problems.
The most effective ones have indeed been proven to work. Prior to purchasing things, do some research on Cnc plasma cutter factory. Here are some questions to consider.
- Can you receive the worth of buying this product?
- How about it leads you to think they'd be interested?
- Why is it vital to evaluate certain qualities while selecting the best product for your requirements and circumstances?
- What are the pros of acquiring this merchandise?
- Is there a site on the internet where I can comprehend more about this product?
Due to market volatility, we are unable to react to all of our clients' requests. By undertaking a proactive search of credible sources, as many materials as feasible should be gathered. Wir uses artificial intelligence, massive data, and a well-calibrated product listing system to provide product suggestions.
It would be beneficial to examine these features more deeply because they were produced and reviewed by people and technology. Keep in mind the following points:
Consumables
Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.
Built-in Air Compressor
You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.
Safety
Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.
Duty Cycle
The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.
Severance Thickness
To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.
Pilot Arc
Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.
Ideal Cut
When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.
Voltage
The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.
Weight
When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.
FAQs
1. How Do You Set Up A Plasma Cutter?
Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.
2. Why Does My Plasma Cutter Cut On An Angle?
Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.
3. How Do I Choose A Plasma Cutter?
Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.
4. How Much Air Pressure Is Needed For A Plasma Cutter?
It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.
5. Can We Cut Wood Or Plastic With A Plasma Cutter?
It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.
6. What Is Possible To Cut By Plasma Cutting?
Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.
7. Is A Cheap Plasma Cutter Worth It?
You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.
8. How Much Faster Is A Plasma Cutter?
Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.
People are still working to increase the speed. Better speed means better products.
Because we are product consulting professionals with much expertise, we believe the data is credible. Aside from that, the Cnc plasma cutter factory data is kept up to date, and you may feel confident that the information is up to date and correct.
We can help you in addition to Cnc plasma cutter factory. If you want to support, please don't hesitate to contact us. Thanks for reading!
By, James Gleick
