Top 3 In 1 Plasma Cutter: In-depth Buying Guides Included

Hamish McKenzie By, Hamish McKenzie
Updated
Mophorn TIG/MMA Plasma Cutter CT520D 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V
Image credit: Amazon.com

Have you desired to own the 3 in 1 plasma cutter or have you tried to buy a good one, but you couldn’t? When you say Yes, your task now is just to read out this article. Here we include all things you may be concerned about when deciding to buy the 3 in 1 plasma cutter, such as the models, product’s features, the buying guides, etc. 

What you are reading is authoritative and accurate since it has been carefully studied for a relatively long period of time. Also, we chose the experts with a broad view of the product’s research, so you are expected to rely on our information to make the best decision.

Our teams, after a considerable amount of time researching and analyzing, introduced the models which may suit your desired needs namely Mophorn TIG/MMA Plasma Cutter CT520D 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V. However, that product isn’t the only one on our list. When you bring a limited wallet with you and cannot afford this model, you are expected to go through another one, LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown.

Here we have a chart of the top 3 in 1 plasma cutter comparison, which also includes the important specifications and product highlights. Of course, you will have a chance to update the most well-known companies as well, namely Mophorn, Lotos, Amico, S7, Tosense, Primeweld, Dnyker, Jomwecl, Hynade. Thus, you can pick one more easily within a moment.

Products Suggest

What To Know About The 3 in 1 plasma cutter Before Purchasing It

There are numerous factors to consider buying a product. In the section below, we will give you some key points to pay attention to prior to buying a 3 in 1 plasma cutter. Of course, It’s indispensable for buyers to do some research before making a purchase so that they won’t end up with something that can’t meet their expectations.

In this post, with our useful and available tips for shopping, we will make it easier for you to select and make the best decisions when tending to own the 3 in 1 plasma cutter. Here is your area! Give it your attention and make it your assistant.

Safety

Safety should be your top priority. You should read all safety information provided by the plasma cutter. To protect your eyes, make sure to get good safety glasses. Although the arc may not be as strong as welding, it could still cause damage to your eyes. You can try shades 3 and 5 glasses. Avoid synthetic gloves as they may melt or stick to skin. Always use leather gloves. To protect your skin from the sparks and arc, cover your arms, legs and body with durable cotton material. To prevent injuries from metal falling, you should wear steel protection boots while you are chopping.

Voltage

The plasma cutters can be used with an indoor power supply that is compatible with 110/115/120V input power. They are ideal for home use or beginners, however they have a limited power output. You will need a plasma cutter with a 220V input if you require more power. This is not compatible with generators. You can choose between two power supply options for your plasma cutter: 110V or 220V. These are my favorites because of their versatility.

Pilot Arc

Plasma cutters with better cutting features will include a pilotarc. This allows you to make cuts without your torch tip coming in contact with any metal. The pilot arc can be used to cut through rusty and painted surfaces. If you plan to cut rusty, or painted surfaces, you will need to wash the spot where the ground clamp is connected. If you are working on metal that has gaps, such as mesh sheets, it is not necessary to stop or start the torch. The continuous arc will keep the torch lit. A pilot arc is a standard feature for most welders, except those made in China.

Severance Thickness

To cut metal effectively, the plasma cutter must be able to cut up to a severance thickness. The severance thickness will result in a slow cut and the machine not producing enough heat to make a clean-cut. For regular or best results, it is not recommended to cut metal at the thickness of the severance.

Built-in Air Compressor

You will need to add an air compressor to most plasma cutters before it can be used. Some plasma cutters have an integrated air compressor. They are more costly but offer more convenience as you don't have to bring your own compressor if you go out into the field. It doesn't require you to connect an air compressor or any other equipment. You can just plug the device in and get cutting. They are worth looking into for a little extra cash.

Ideal Cut

When choosing a plasma cutter, the first thing to consider is how thick it can cut metal. Consider the thickness of the metal that you will be using most often and search for an optimal cut at this thickness. The machine is capable of cutting mild metal at 10 inches per hour. You won't get as much out of the severance cutter. It will produce less quality results. The ideal cut is the best choice if you want quality cuts.

Weight

When buying equipment, weight is an important consideration. You don't want your equipment to weigh you down. Inverter technology has made most plasma cutters relatively lightweight. A plasma cutter that has an integrated air compressor might weigh a little more, but it will be much easier to transport as all you need is the plasma cutter.

Consumables

Consumables will cost you an ongoing fee after your plasma cutter is purchased. Consumables include the shield cap, nozzle and shield caps, as well as the swirl ring. Each one has a different life expectancy depending on many variables. However, they will all be damaged when the torch is used to pierce metal or the molten metal returns onto it. Otherwise, the hole must be perfect round. The put depth will affect how the cut is made. Long-lasting consumables are more common for more costly welders. Because of the high quality consumables, Hypertherm machines can be expensive but have low operating costs.

Duty Cycle

The machine's duty cycle is the time it can continue to operate without cooling down. A 35% duty cycle with a fixed amperage and voltage would mean the plasma cutter could run for approximately 3.5 minutes, instead of 10, without needing to cool down. Lower amperage will result in a longer duty cycle. For deep, long-lasting metal cutting, a longer duty cycle with a greater amperage will be more efficient.

FAQs

Is A Cheap Plasma Cutter Worth It?

You should not buy a low-quality plasma cutter. It will not deliver the power, durability and quality you need. A plasma cutter with low prices may be able to cut thinner sheets.

Can We Cut Wood Or Plastic With A Plasma Cutter?

It is impossible to cut nonconductive materials. Plastic and wood are both electrically resistant materials.
Prerequisite for the air pressure maintenance and current setting is the metal thickness. To start cutting, bring the nozzle close to the metal.

Why Does My Plasma Cutter Cut On An Angle?

Plasma metal cutters can plasma cut at odd angles for a variety of reasons. These include the following: The torch nozzle is worn; there's insufficient power to thearc; you are cutting too fast for your power rating; there's too much gas going to thenozzle; or the plasma cutter is working too slowly.
It is worth noting, however, that plasma cutters tend to have a slightly "bevel", or angle to cut, of approximately 1-3 degrees. This is due to how the gas jet enters the nozzle. You can decrease this, but it can't be eliminated completely.

How Do You Set Up A Plasma Cutter?

Plasma cutting works on the principle that complete electric current is used. Therefore, a ground clamp will be required. You should choose a safe surface for your workshop that allows you to move freely around the work area.
After rechecking that the compressor is working, it's time to turn on the machine. Connect the compressor to the cutter, and observe the constant flow of air pressure.
Place your workpiece on the table, and attach a ground clamp as close as you can to ensure the best result. Turn on the unit using a flicker and press a button marked power or on/off.

How Do I Choose A Plasma Cutter?

Consider the cost of the plasma cutter and the inputs. Will they provide enough power to cut through the desired thickness?
You should also consider the type of finish you require, as well as whether you prefer a torch with a lead (your project requirements will dictate which lead length you use). Also, you must decide what torch technology you believe will be most effective in achieving the exact cutting you will need as a metal fabricator on the jobsite.

How Much Air Pressure Is Needed For A Plasma Cutter?

It is best to buy a compressor with 1.5x the CFM (cubic feet per hour) that the plasma cutter requires. Then, have it delivered at the PSI (pounds/square inch) that the tool needs.
Plasma cutters can operate between 60 and 120 PSI, depending on their output range.

What Is Possible To Cut By Plasma Cutting?

Plasma cutting can be done with all electrically conductive metals, as long as there is an electric current circuit running through the workpiece and clamp.
An electric current creates an arc, and the heat from the arc melts metal into ionic plasma. Once it passes through an opening, the plasma expands and speeds up. This causes the air pressure to blow away any molten metal plasma and produce a precise and clean cut.
It can be used to cut metals such as copper, aluminum and brass. The machine can also cut electrically-conductive materials.

How Much Faster Is A Plasma Cutter?

Plasma cutting is the best method of cutting metal. A good plasma cutter can cut up to 200 inches of metal per minute.
People are still working to increase the speed. Better speed means better products.

Conclusion

Hopefully, our sharing above will take you much closer with your 3 in 1 plasma cutter. The model we suggested for you is equipped with all things you may need. Nevertheless, suppose you have a fancy for another one, we highly recommend Plasma Cutter, CUT50H 50A Dual Voltage 110/220V, AG60 Torch Plasma cutting machine. To conclude, we wish you a pleasant shopping time. And if there is any problem related to this article that you wonder about, please contact us soon for timely answers. It's our pleasure to serve you!


0 ratings